In the IoT application space, Sensor Nodes are enabled by a number of fundamental technologies, primarily a low-power MCU, some form of wireless communication and strong security.  In order to focus attention on the practical aspects of combining the associated supporting devices and software, this Tech on Tour training introduces the Atmel® Wi-Fi capability and CryptoAuthentication™ hardware key storage in the context of the simplest possible use case. 

Turning on an LED—the simplest first step in playing with any new development kit or technology—represents our ‘Hello World!’.  Of course to any engineer this apparently simple act solidifies a cause-and-effect relationship between the engineer’s will, the embedded hardware and all the supporting technologies that are now under his/her control.

In the IoT application, the LED is controlled using a smart phone app via the Internet, while our sensor–node use case is enabled by reading an analog temperature sensor.  The first part of the training introduces Atmel Wi-Fi technology, which connects our embedded development kit of choice, an Atmel | SMART SAMD21 Xplained Pro, via the Atmel SmartConnect WINC1500 Wi-Fi module to a local Access Point.  The result is the ability to send temperature information to any phone or tablet on the network as well as the remote control of LED0.

As soon as something is connected, those with questionable objectives may find-it and potentially figure out how to control it.  The second part of the training will focus on how CryptoAuthentication can be used to authenticate the temp sensor node and host application before it can read the temperature information to avoid fake nodes.  A secure communications link is implemented using a session key to and from the remote node.




Questions?
New Hands on Training!  IoT Secure Hello World:
Introducing Atmel Wi-Fi and CryptoAuthentication Technologies
View Videos:


"Hello World!"
Get a sneak peek at what is covered




Of Big Bangs and Turning On Lamps





How We Built It





Agenda
8:30 – 9:00     Check-In and Preparation
                  Assistance with installing software will be provided
9:00 – 10:15     Introduction to Atmel Wi-Fi Solutions
                   WINC1500/WILC1000 Hardware and Performance Overview
                   Software and IoT Solution Overview
                   Wi-Fi Network Controller IoT Sensor Application
10:15 – 10:30    Hands-on Introduction
10:30 – 10:45    BREAK

10:45 – 12:30    Hands-on: WINC1500 Wi-Fi Network Controller IoT Sensor Application
                    Sending temperature information to any phone or tablet on the network
                    Enabling remote control of LED0 on the SAM D21 Xplained Pro board
12:30 – 1:30    LUNCH
1:30 – 2:15      Introduction to Atmel CryptoAuthentication IoT Security and Technology
2:15 – 3:00      Hands-on Introduction: Authenticating IoT Nodes
Authenticate the temp sensor node and host application before being able to read the temperature information to avoid fake nodes
How to implement a secure communications link using a session key to and from the remote node to any phone or tablet on the network
3:00 – 3:15    BREAK
3:45 – 4:30    Hands-on: Authenticating IoT Nodes (continued…)
4:30 – 5:00    Wrap-up, Questions and Answer
s
Prerequisites
Software Requirements
Atmel Studio 6.2 - Download Software
Wireshark Packet Sniffer will be provided
Hardware Requirements
Attendees are required to bring a laptop. Atmel will NOT supply computers at the training.
Please, make sure to have Administrator rights on your laptop.
Laptop must have at least one Internet port and one free USB host connector.
Evaluation Kits Requirements
As part of your registration fee, you will receive the WINC1500 Xplained Pro starter kit to take home with you and the end of the training session:
Kit Description (Product Code: ATWINC1500-XSTK) 
Atmel | SMART SAMD21 -XPRO  host MCU board
Atmel WINC1500 module mounted ATWINC 1500 Xplained Pro Extension
Atmel Digital I/O WING extension board for sensor and SD-Card input
Target USB
Join Atmel Tech on Tour!
See how we offer the industry’s most highly integrated Internet of Things (IoT) solution. Atmel® technologies power the edge nodes that form the links between individual devices and the gateways that connect to the cloud. We also supply makers and designers with all the basic building blocks of smart, connected designs—from embedded processing and connectivity to sensors, security and software. A rich ecosystem of design tools and development partners ties this comprehensive solution together, making it simple to leverage our expertise.
SIGN UP NOW!



View Details on Location and Dates

FEE : Euro 50

Cannot find one in your area?
Send a request to events@atmel.com.